Renesas Technology

SKP16C26 Sample Programs

All sample programs for your SKP16C26 Starter kit were copied to your PC during the software installation. They are all located under the directory,

C:\MTOOL\SKP16C26\Sample_Code

The table below lists the sample programs and application notes that were installed. Each directory contains all the needed source file as well as pre-configured project files needed to rebuild the program using HEW and the NC30WA Entry version of the compiler. Common source files that are used in more than one project, such as the SFR definition header file or LCD display driver, are located in the \Sample_Code\common directory.

The project files were created using HEW 3.0 R1 Entry Version that comes with the SKP CD.

Application Notes and Sample Code

Peripheral/Function	Details	App Note	Sample Code
Peripheral/Function	Details	App Note	Sample Code
ADC	One-Shot Mode	Open	Open
	Repeat Mode	Open	Open
	Repeat Sweep Mode 0	Open	Open
	Repeat Sweep Mode 1	Open	Open
	Single Sweep Mode	Open	Open
Flash/CPU Rewrite	EW0 Mode	Coming Soon	Open
	EW1 Mode	Open	Open
	EW1 Mode with LCD	N/A	Open
	Flash API	Open	Open
	Flash Suspend	Coming Soon	Open
	Programming Using FoUSB Programmer	Open	N/A
DMAC	Fixed Source-Forward Destination	Open	Open
DMAC	Forward Source-Fixed Destination	Open	Open
USART/SIO	UART	Open	Open
USART/SIO	Clocked Synchronous	Coming soon	Coming soon
Timers	One-Shot Mode	Open	Open
	Timer Mode	Open	Open
	Event Counter Mode	Open	Open
	Pulse Output Mode	Open	Open
	Pulse Width Modulation Mode	Open	Open
	Pulse Width Measurement	Open	Open
	Pulse Measurement (with Accelerometer)	Open	Coming soon
Voltage Detection	Vdet4 Voltage Detect	Open	N/A
Voltage Detection	Vdet3 Voltage Detect	Open	N/A
Others	1-wire^TM Interface	Open	N/A
	Key-on Interrupt	Open	Open
	Power Modes	Open	N/A
	Real-Time Clock and Wait Mode	Open	Open
	Virtual EEPROM (Fixed Sectors)	Coming soon	Open
	Virtual EEPROM (Fixed Sectors) with LCD Support	N/A	Open
	Watchdog Timer	Open	Open
	Interrupt handlers in C	Open	N/A
RTA-FoUSB-MON In-Circuit Debugger and Programmer	Target Setup for Flash Programmer	Open	N/A
	Target Setup for In-Circuit Debugger	Open	N/A
	(Target MCU) Firmware Requirements for In-Circuit Debugger	Open	N/A
	Programming using the FoUSB Programmer	Open	N/A

Startup Files Directory


Default SKP Startup Files – ncrt0_26skp.a30 – sect30_26skp.inc	These files are the default startup files used for generating all C-language projects created with the SKP16C26. These start-up files are located in the \Sample_Code\startup_files\ directory.	App Note Open

Common Directory


M16C/26 SFR Header Files – sfr262.h – sfr262.inc	Include these header files in your C-language or assembly-language projects files to setup and use the Special Functions Registers of the M16C/26 MCU. These header files are located in the \Sample_Code\common\ directory. - C file header: sfr262.h - Assembly file header: sfr262.inc
SFR Labels – sfr_26.a30	When added to a project, makes SFR labels visible on the debugger, which is convenient when checking settings of the SFR's. This file is located in the \Sample_Code\common\ directory.
LCD Driver – skp_lcd.h – skp_lcd.c	These files contain variable and function declarations when using the LCD on the SKP board. These files are located in the \Sample_Code\common\ directory.
EW0_API – flash-26-ew0.c – flash-26-ew0.h	These files contain variable and function declarations when using the Flash CPU Rewrite EW0 mode. These files are located in the \Sample_Code\common\ directory.
EW1_API – flash-26-ew1.c – flash-26-ew1.h	These files contain variable and function declarations when using the Flash CPU Rewrite EW1 mode. These files are located in the \Sample_Code\common\ directory.
VirEE1_API – virEE1-26.c – virEE1-26.h	These files contain variable and function declarations when implementing Virtual EEPROM operations. These files are located in the \Sample_Code\common\ directory.
VirEE2_API – virEE2-26.c – virEE2-26.h	These files contain variable and function declarations when implementing Virtual EEPROM operations with initial fixed block of data (e.g. calibration data, etc). These files are located in the \Sample_Code\common\ directory.
RTC – rtc.c – rtc.h	These files contain variable and function declarations when implementing real-time clock (RTC) operations. These files are located in the \Sample_Code\common\ directory.
Board Support Package – skp_bsp.h	This file contain variable definitions and macros specific to the SKP, which may be useful when creating programs in C. This file is located in the \Sample_Code\common\ directory.